Global quantification of emerging and legacy per- and polyfluoroalkyl substances in indoor dust: Levels, profiles and human exposure.

This study investigated the occurrence and distribution of per- and polyfluoroalkyl substances (PFASs) in house dust samples from six regions across four continents. PFASs were detected in all indoor dust samples, with total median concentrations ranging from 17.3 to 197 ng/g. Among the thirty-one PFAS analytes, eight compounds, including emerging PFASs, exhibited high detection frequencies in house dust from all six locations. The levels of PFASs varied by region, with higher concentrations found in Adelaide (Australia), Tianjin (China), and Carbondale (United States, U.S.). Moreover, PFAS composition profiles also differed among regions. Dust from Australia and the U.S. contained high levels of 6:2 fluorotelomer phosphate ester (6:2 diPAP), while perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were predominant in other regions. Furthermore, our results indicate that socioeconomic factors impact PFAS levels. The assessment of human exposure through dust ingestion and dermal contact indicates that toddlers may experience higher exposure levels than adults. However, the hazard quotients of PFASs for both toddlers and adults were below one, indicating significant health risks are unlikely. Our study highlights the widespread occurrence of PFASs in global indoor dust and the need for continued monitoring and regulation of these chemicals.

Polylactic Acid Microplastics Do Not Exhibit Lower Biological Toxicity in Growing Mice Compared to Polyvinyl Chloride Microplastics.

Biomicroplastics (BMPs) will be produced during bioplastic degradation (i.e., polylactic acid), although bioplastics have been widely used for food packaging. Like conventional microplastics (MPs), BMPs would be mistakenly ingested into the body through diet or drinking water, but their health risks in vivo are poorly understood. Here, we deeply compared the toxicity difference between irregularly shaped polylactic acid (PLA-MPs, 16-350 µm) and polyvinyl chloride (PVC-MPs, 40-300 µm) MPs in growing mice. After six weeks of exposure, PLA-MP exposure resulted in more severe inhibition of the mice's weight gain than PVC-MPs did. Both PLA- and PVC-MPs significantly elevated the levels of oxidative stress. Moreover, significant changes including altered transcriptional profiles and significantly differentially expressed genes in liver and colon transcription levels were observed in the PVC- and PLA-MP groups. Compared with PVC-MPs, PLA-MPs have a stronger effect on lipid metabolism and digestive systems. PLA-MPs also caused gut microbiota dysbiosis, significantly interfering with the relative abundance of microbiota and altering microbial diversity. These findings indicated the toxicities of PLA-MPs in growing mice were not significantly reduced compared to PVC-MPs, which would also provide new insights for re-examining bioplastic safety.

Large polystyrene microplastics results in hepatic lipotoxicity in mice.

Like small microplastics (MPs), recent studies reveal that large MPs could cause health risks in mice, even if they are not enriched in tissues. However, potential hepatoxicity following large MPs exposure and the underlying mechanisms have not been thoroughly investigated. In the present study, we explored the disruption of hepatic lipid metabolism and potential underlying toxic mechanisms in mice caused by long-term exposure to large polystyrene MPs (40-100 µm) based on a multi-omic approach. After 21 weeks of feeding foods containing MPs (50 and 500 mg/kg food), lipidomic revealed that environmentally relevant and higher doses MP exposures resulted in significant changes in a total of 20 lipid classes. Ceramide (Cer) and dihydroceramide (dhCer) were significantly reduced, while cholesteryl ester (CE), lysoalkylphosphatidylcholine (LPCO), lysophosphatidylethanolamine (LPE) and total glyceride (TG) were all elevated by MPs. The transcriptomic and other physiological data suggested that the potential toxic mechanisms may be related to disorders of fatty acid and cholesterol synthesis and metabolism disorders, and transporting of TG. Our findings demonstrate the hepatic lipotoxicity following exposure to environmentally relevant and higher doses of large MPs, calling for future research and management of the environmental risks of MPs with relatively large particle sizes.

Long-Term Exposure to Environmentally Relevant Doses of Large Polystyrene Microplastics Disturbs Lipid Homeostasis via Bowel Function Interference.

The question of whether long-term chronic exposure to microplastics (MPs) could induce dose- and size-dependent adverse effects in mammals remains controversial and poorly understood. Our study explored potential health risks from dietary exposure to environmentally relevant doses of polystyrene (PS) MPs, through a mouse model and integrated analyses of the interruptions of fecal microbial metagenomes and plasma lipidomes. After 21 weeks of exposure to the MPs (40-100 µm), mice mainly exhibited gut microbiota dysbiosis, tissue inflammation, and plasma lipid metabolism disorder, although no notable accumulation of MPs was observed in the gut or liver. The change of the relative abundance of microbiota was strongly associated with the exposure dose and size of MPs while less significant effects were observed in gut damage and abnormal lipid metabolism. Moreover, multiomics data suggested that the host abnormal lipid metabolism was closely related to bowel function disruptions, including gut microbiota dysbiosis, increased gut permeability, and inflammation induced by MPs. We revealed for the first time that even without notable accumulation in mouse tissues, long-term exposure to MPs at environmentally relevant doses could still induce widespread health risks. This raises concern on the health risks from the exposure of humans and other mammals to environmentally relevant dose MPs.

Extraction of biodegradable microplastics from tissues of aquatic organisms.

Biodegradable plastics (BPs) have been given high hopes to substitute conventional plastics, but their biodegradation requires strict conditions. BPs can accumulate for a long time in the environment and even derive biodegradable microplastics (BMPs), thus threatening wildlife and ecosystems. However, no efficient method is available for extracting BMPs from organisms' tissues. This study used multi-criteria decision-making (MCDM) methods to comprehensively evaluate and optimize extraction protocols of five BMPs from economic aquatic species. Digestion time, digestion efficiency, mass loss, cost, polymer integrity and size change were selected as evaluating indictors. According to the screening results of MCDM methods, Pepsin+H2O2 was selected as the optimal digestion method of BMPs because of its highest comprehensive score, which has high digestion efficiency (99.56%) and minimum plastic damage. Compared with olive oil, NaI is more suitable for separating BMPs from the digested residues. Furthermore, the combination of Pepsin+H2O2 digestion and NaI density separation was used to extract all five kinds of BMPs from the bivalve, crab, squid, and crayfish tissues, and all the recovery rates exceeded 80%. These results suggest that the optimal protocol is practicable to extract various BMPs from various aquatic organisms.

Interphase Effect on the Macro Nonlinear Mechanical Behavior of Cement-Based Solidified Sand Mixture.

This paper investigates the interphase effect on the macro nonlinear mechanical behavior of cement-based solidified sand mixture (CBSSM) using a finite element numerical simulation method. CBSSM is a multiphase composite whose main components are soil, cement, sand and water, often found in soft soil foundation reinforcement. The emergence of this composite material can reduce the cost of soft soil foundation reinforcement and weaken silt pollution. Simplifying the CBSSM into a three-phase structure can efficiently excavate the interphase effects, that is, the sand phase with higher strength, the cement-based solidified soil phase (CBSS) with moderate strength, and the interphase with weaker strength. The interphase between aggregate and CBSS in the mixture exhibits the weak properties due to high porosity but gets little attention. In order to clarify the mechanical relationship between interphase and CBSSM, a bilinear Cohesive Model (CM) was selected for the interphase, which can phenomenologically model damage behaviors such as damage nucleation, initiation and propagation. Firstly, carry out the unconfined compression experiments on the CBSSM with different artificial gradations and then gain the nonlinear stress-strain curves. Secondly, take the Monte Carlo method to establish the numerical models of CBSSM with different gradations, which can generate geometric models containing randomly distributed and non-overlapping sand aggregates in Python by code. Then, import the CBSSM geometric models into the finite element platform Abaqus and implement the same boundary conditions as the test. Fit experimental nonlinear stress-strain curves and verify the reliability of numerical models. Finally, analyze the interphase damage effect on the macroscopic mechanical properties of CBSSM by the most reliable numerical model. The results show that there is an obviously interphase effect on CBSSM mechanical behavior, and the interphase with greater strength and stiffness ensures the macro load capacity and service life of the CBSSM; a growth in the interphase number can also adversely affect the durability of CBSSM, which provides a favorable reference for the engineering practice.

Multi-omic studies on the toxicity variations in effluents from different units of reclaimed water treatment.

The conventional reclaimed water technologies could not effectively remove the micropollutants. Although the health risks of these residual micropollutants have been evaluated by model calculation, few animal-based studies have been performed, which is essential for risk verification. Here, we used transcriptomic, metabolomic, and other biochemical techniques to reveal the toxicity variations of effluents from oxidation ditch (OD), coagulation tank (CT), biological aerated filter (BAF), and ultraviolet disinfection pool (UV) in a reclaimed water plant located in Nanjing, China. No evident toxicity reduction trend was observed along the treatment units. Compared with control and other three treatment unit effluents, long-term exposure to reclaimed water (UV effluent) aggravated oxidative stress in mice and induced abnormal lipid metabolism and immune response. Moreover, striking correlations were identified between multi-omic biomarkers (4 differentially expressed genes and 8 significant changes metabolites) and residual micropollutants (40 semi-volatile organic compounds and 6N-nitrosamines). Our results strongly highlight that the health risks of reclaimed water are mainly induced by the residual micropollutants, and more advanced treatments and stringent discharge standards are needed to ensure the safety of reclaimed water.

Two novelty learning models developed based on deep cascade forest to address the environmental imbalanced issues: A case study of drinking water quality prediction.

Environmental quality data sets are typically imbalanced, because environmental pollution events are rarely observed in daily life. Prediction of imbalanced data sets is a major challenge in machine learning. Our recent work has shown deep cascade forest (DCF), as a base learning model, is promising to be recommended for environmental quality prediction. Although some traditional models were improved by introducing the cost matrix, little is known about whether cost matrix could enhance the prediction performance of DCF. Additionally, feature extraction is also an important way to potentially improve the model's ability to predict the imbalanced data. Here, we developed two novelty learning models based on DCF: cost-sensitive DCF (CS-DCF) and DCF that combines unsupervised learning models and greedy methods (USM-DCF-G). Subsequently, CS-DCF and USM-DCF-G were successfully verified by an imbalanced drinking water quality data set. Our data presented both CS-DCF and USM-DCF-G show better prediction performance than that of DCF alone did. In particular, USM-DCF-G shows the best performance with the highest F1-score (95.12 ± 2.56%), after feature extraction and selection by using unsupervised learning models and greedy methods. Thus, the two learning models, especially USM-DCF-G, were promising learning models to address environmental imbalanced issues and accurately predict environmental quality.

Enhanced reproductive toxicities induced by phthalates contaminated microplastics in male mice (Mus musculus).

It has been demonstrated that microplastics (MPs) can transport phthalate esters (PAEs) into the tissues of mice. However, the influence of MPs on accumulation of PAEs and the combined toxicity need profound investigation. In this study, the bioaccumulation of PAEs and reproductive toxicity due to contaminated MPs exposure were investigated. After exposure to PAE-contaminated MPs for 30 days, significantly increased accumulation of PAE was observed in the liver and gut but not in the testis, which are ascribed to the distribution of MPs in tissues. Herein, most micro-size MPs accumulated in the gut and liver, while only a few nano-size MPs entered the Sertoli cells. Compared with virgin MPs and PAEs alone, PAE-contaminated MPs induced enhanced reproductive toxicities manifested by greater alterations in sperm physiology and spermatogenesis. The enhanced toxicities were also confirmed by the testicular transcriptomic alterations and aggravated oxidative stress induced by PAE-contaminated MPs. These aggravated reproductive toxicities were not caused solely by PAE, but may also be caused by the sensitization effect of oxidative stress induced by MPs. Our results highlight the potential reproductive toxicity on male terrestrial mammals due to co-exposure of MPs and plastic additives and provide valuable insights into the mechanism of combined toxicity of MPs and other pollutants.

Microplastics release phthalate esters and cause aggravated adverse effects in the mouse gut.

Increasing evidence shows that microplastics (MPs) have the potential to act as carriers and transport contaminants into organisms, as well as induce serious health risks. Here we endeavored to address for the first time whether MPs could transport and release phthalate esters (PAEs) into mouse gut and the consequential toxic effects. As a result, MPs could adsorb PAEs, transport PAEs into the gut and cause intestinal accumulation. The accumulation of PAE in the gut followed the order of DEHP > DBP > DEP > DMP, which was the same order for the adsorption of PAEs on MPs. After exposed to DEHP-contaminated MPs for 30 days, significantly increased intestinal permeability and enhanced intestinal inflammation were induced compared with individual MPs and DEHP according to biochemical and histological analysis. Transcriptomic analysis found that 703 genes were differentially regulated and these genes are involved in oxidative stress, immune response, lipid metabolism, and hormone metabolism. Moreover, gut microbiota analysis found that the combined exposure of MPs and DEHP also caused alterations in gut microbiota composition, especially some energy metabolism and immune function related bacteria were significantly changed in the relative abundance. The aggravated effects on intestinal inflammation and metabolic disorders caused by DEHP-contaminated MPs may attribute to increased DEHP accumulation, changed exposure pathway, and shared toxic mechanisms. Our results provide valuable information for the health risk of MPs and plastic additives.

Comparative analysis of surface water quality prediction performance and identification of key water parameters using different machine learning models based on big data.

The water quality prediction performance of machine learning models may be not only dependent on the models, but also dependent on the parameters in data set chosen for training the learning models. Moreover, the key water parameters should also be identified by the learning models, in order to further reduce prediction costs and improve prediction efficiency. Here we endeavored for the first time to compare the water quality prediction performance of 10 learning models (7 traditional and 3 ensemble models) using big data (33,612 observations) from the major rivers and lakes in China from 2012 to 2018, based on the precision, recall, F1-score, weighted F1-score, and explore the potential key water parameters for future model prediction. Our results showed that the bigger data could improve the performance of learning models in prediction of water quality. Compared to other 7 models, decision tree (DT), random forest (RF) and deep cascade forest (DCF) trained by data sets of pH, DO, CODMn, and NH3-N had significantly better performance in prediction of all 6 Levels of water quality recommended by Chinese government. Moreover, two key water parameter sets (DO, CODMn, and NH3-N; CODMn, and NH3-N) were identified and validated by DT, RF and DCF to be high specificities for perdition water quality. Therefore, DT, RF and DCF with selected key water parameters could be prioritized for future water quality monitoring and providing timely water quality warning.

DEHP and DINP Induce Tissue- and Gender-Specific Disturbances in Fatty Acid and Lipidomic Profiles in Neonatal Mice: A Comparative Study.

Di-isononyl phthalate (DINP) is considered one of the main industrial alternatives to di(2-ethylhexyl)phthalate (DEHP), a well-known chemical with various toxic effects including the disruption with lipid metabolism. However, the potential effects of DINP on lipid metabolism have rarely been investigated in mammals. Our study demonstrated that exposure of neonatal mice to DEHP and DINP at a daily dose of 0.048 or 4.8 mg/kg from postnatal day 0 (PND0) to PND21 caused nonmonotonic as well as tissue- and gender-specific alterations of total fatty acid (FA) compositions in plasma, heart, and adipose tissues. However, the patterns of disruption differed between DEHP- and DINP-treated groups. On the basis of targeted lipidomic analyses, we further identified gender-specific alterations of eight lipid classes in plasma following DEHP or DINP exposure. At the higher dose, DEHP induced decreases in total phosphatidylcholines and phosphatidylinositol (PI) in females and increases in phosphatidylethanolamines (PEs) and triglycerides in males. By contrast, DINP at the higher dose caused alterations of PEs, PIs, phosphatidylserines, and cholesterols exclusively in male mice, but no changes were observed in female pups. Although the most significant dysregulation of lipid metabolism was often observed for the higher dose, the lower one could also disrupt lipid profiles and sometimes its effects may even be more significant than those induced by the higher dose. Our study for the first time identified tissue- and gender-specific disruptions of FA compositions and lipidomic profiles in mice neonatally exposed to DINP. These findings question the suitability of DINP as a safe DEHP substitute and lay a solid foundation for further elucidation of its effects on lipid metabolism and underlying mechanisms.

Accumulation of different shapes of microplastics initiates intestinal injury and gut microbiota dysbiosis in the gut of zebrafish.

Different shapes of microplastics are widely detected in the environment and organisms and most of them remain in the gut. However, the influences of shapes on the bioaccumulation and toxicity of microplastics in the gut are largely unknown. Three shapes (bead, fragment, and fiber) of microplastics of comparable size in one dimension were prepared to exposure to zebrafish. The accumulation and toxicities of microplastics in the gut were detected. Shape-dependent accumulation in the gut was observed with the order of fibers (8.0 µg/mg) > fragments (1.7 µg/mg) > beads (0.5 µg/mg). The accumulation of microplastics caused multiple toxic effects in fish intestine, including mucosal damage, and increased permeability, inflammation and metabolism disruption. Based on these toxic effects, microplastic fibers resulted in more severe intestinal toxicity than microplastic fragments and beads did. Furthermore, microplastics also induced gut microbiota dysbiosis and specific bacteria alterations, which will provide novel insights into the potential mechanism of microplastics causing intestinal toxicities in fish. Our results also suggested that shape-depended effects should not be ignored in the health risk assessment of microplastics.

Combined effects of polystyrene microplastics and natural organic matter on the accumulation and toxicity of copper in zebrafish.

As emerging contaminants, microplastics (MPs) are predicted to act as vectors for other contaminants and their combined effects are largely unknown. In this study, the combined effects of MPs and natural organic matter (NOM) on the accumulation and toxicity of copper (Cu) in zebrafish (Danio rerio) were investigated. As a result, small-size MPs could absorb more Cu than large-size MPs. The presence of NOM promoted Cu adsorption on MPs in the pH range of 6-8. Our results demonstrate that the combination of MPs and NOM increased Cu accumulation in the livers and guts in a size-depended manner. Correspondingly, the results of biochemical test showed that MPs and NOM could aggravate Cu-toxicity in the livers and guts, which is manifested in the increased levels of malonaldehyde (MDA) and metallothionein (MT) and decreased levels of superoxide dismutase (SOD). Furthermore, the results of transcriptomic analysis suggested that such aggravation of toxicity was mainly attributed to the inhibition of Cu-ion transport and the enhanced oxidative stress. Since the co-existence of MPs and NOM in the environment is inevitable, their enhancement effects on the bioaccumulation and toxicity of other pollutants such as heavy metals deserve more attention.

Experimental Investigation of the Compactability and Cracking Behavior of Polyacrylamide-Treated Saline Soil in Gansu Province, China.

Polyacrylamide (PAM) is a water-soluble polymer with the ability to enhance a soil's stability. PAM is currently being used to prevent irrigation-induced erosion and enhance the infiltration in farmland soil. To improve the compaction properties of the saline-soil-based filling material that is used in highway subgrade and the cracking resistance capacity of a saline soil's crust, the consistency limits, compactability, microstructure, and cracking morphology of untreated and PAM-treated saline soil were investigated. The saline soils were sampled from the soil crust and a depth of 2.0⁻3.0 m in Gansu Province, China. Two PAM concentrations (0.1% and 0.5% in mass ratio) were selected. The liquid limits and plastic limits of the saline soil samples from the surface (0⁻0.05 m) and a depth of 2.0⁻3.0 m noticeably increased as PAM concentration increased. The maximum dry densities decreased as PAM concentration and plasticity increased, and the optimum water contents of the two saline soil types did not significantly change. These results suggest that a higher shearing resistance between particles partially prevented compression from occurring during compaction. Mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) test results showed that the PAM agent dispersed the bulky pellets, and the soil's structure was formed by flaky and acicular platelets that filled the micropores. A quantitative analysis of crack patterns showed that the cross-points of the crack network and the crack length decreased as the PAM concentration increased. These results indicate that an increase in PAM reduces the shrinkage strain and the flaws or pores within saline soils. Therefore, PAM's stabilizing effect on saline soil under a wetting⁻drying cycle was proven.

Occurrence and removal of progestagens in municipal wastewater treatment plants from different regions in China.

Progestagens discharged from municipal wastewater treatment plants (WWTPs) have increasingly gained attention due to their potential risks to the aquatic organisms. However, limited information is available on the occurrence and removal of various progestagens in WWTPs in different cities of China. This work investigated the occurrence and removal of 11 progestagens in 21 WWTPs from 19 Chinese cities. Results showed that progestagens are widely distributed in the investigated WWTPs, with higher influent concentrations of total progestagens in northern WWTPs. The concentration of progestagens in WWTP influent were closely correlated with influent quality, service population and daily service volume of the WWTPs. Additionally, progesterone (PGT) and dydrogesterone (DDT) were two predominant progestagens in influent, effluent and excess sludge. Up to 5 of 11 progestagens showed high aqueous removal efficiencies (median removal efficiency >90%), whereas megestrol acetate (MTA), chlormadinone acetate (CMA), drospirenone (DSP) and levonorgestrel (LNG) had a removal efficiency of below 50%. Specially, the behaviors of progestagens along the anaerobic-anoxic-oxic of a WWTP were further explored and the aerobic tank is the main contributor to the removal of progestagens. Finally, in the effluent of these 21 WWTPs, daily mass loadings of the total progestagens ranged from 0.51 to 10.4 g d-1. Notably, LNG exhibited high potential risk to the fish base on risk quotient.

Evidence that microplastics aggravate the toxicity of organophosphorus flame retardants in mice (Mus musculus).

This study was performed to reveal the health risks of co-exposure to organophosphorus flame retardants (OPFRs) and microplastics (MPs). We exposed mice to polyethylene (PE) and polystyrene (PS) MPs and OPFRs [tris (2-chloroethy) phosphate (TCEP) and tris (1,3-dichloro-2-propyl) phosphate (TDCPP)] for 90 days. Biochemical markers and metabolomics were used to determine whether MPs could enhance the toxicity of OPFRs. Superoxide dismutase (SOD) and catalase (CAT) increased (p < 0.05) by 21% and 26% respectively in 10 µg/L TDCPP + PE group compared to TDCPP group. Lactate dehydrogenase (LDH) in TDCPP + MPs groups were higher (18%-30%) than that in TDCPP groups (p < 0.05). Acetylcholinesterase (AChE) in TCEP + PE groups were lower (10%-19%) than those in TCEP groups (p < 0.05). These results suggested that OPFR co-exposure with MPs induced more toxicity than OPFR exposure alone. Finally, in comparison to controls we observed that 29, 41, 41, 26, 40 and 37 metabolites changed significantly (p < 0.05; fold-change > 1.2) in TCEP, TCEP + PS, TCEP + PE, TDCPP, TDCPP + PS and TDCPP + PE groups, respectively. Most of these metabolites are related to pathways of amino acid and energy metabolism. Our results indicate that MPs aggravate the toxicity of OPFRs and highlight the health risks of MP co-exposure with other pollutants.

Health risk assessment of reclaimed wastewater: A case study of a conventional water reclamation plant in Nanjing, China.

Contaminated reclaimed wastewater has the potential to induce adverse effects on the health of wastewater workers and residents. However, few studies have focused on these health risks. In this study, we assessed the health risk of samples collected from different treatment processing units used in a typical water reclamation plant in Nanjing, China. Chemical analysis revealed that 40 semi-volatile organic compounds (SVOCs) and 6 N-nitrosamines (NAs) persisted after wastewater treatment. A health risk assessment revealed that the SVOCs in effluents pose negligible non-carcinogenic risk to wastewater workers and local residents as both the hazard quotient (HQ) and hazard index (HI) were all below 1.00. However, polycyclic aromatic hydrocarbons (PAHs), phthalate esters (PAEs) and NAs may present a carcinogenic risk, since their risk index via dermal exposure exceeded the safety limit (1.00×106), indicating that conventional treatment processes cannot effectively reduce the health risk in reclaimed wastewater. These results strongly suggest the need for the introduction of advanced treatment technologies capable of effectively removing SVOCs and NAs in water reclamation plants.

The Role of Superabsorbent Polymer on Strength and Microstructure Development in Cemented Dredged Clay with High Water Content.

This paper presents the role of superabsorbent polymer (SAP) on strength and microstructure development in cemented clays with notably high water content. A series of unconfined compressive strength (UCS), scanning electron microscope (SEM) and X-ray diffraction (XRD) tests were performed to identify strength behavior and microstructure. Results showed that SAP significantly influenced the mechanical behavior of cemented clays with notably high water content, characterized by an increase in the unconfined compressive strength and a decrease in the after-curing water content with SAP content. This revealed that the strength increase due to SAP was directly related to the water absorption by SAP. Meanwhile, XRD results showed that the hydration products were controlled by cement and lime content, regardless of SAP content. That meant there was no chemical reaction between SAP particles used in this study and cement or lime. The microstructure analysis by SEM revealed that SAP played an important role in the microstructure of cemented clays. With an increase in SAP content, the water absorbed by SAP increased significantly, leading to a decrease in the pore volume and a denser soil fabric. This behavior indicated that the primary role of SAP on strength increase was to absorb and fix water in cemented clays. Consequently, the clay⁻cement cluster distance decreased with an increase in solid mass (soil particles and swollen SAP particles) and a decrease in pore water. The corresponding tighter flocculated fabric due to SAP eventually led to the strength increase.